LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1103 (Exterior Lighting System) >> Diagnostic Tests >> Turn Signal and Hazard Lamps >> Pinpoint Tests >> Pinpoint Test L: The Hazard Lamps Are Inoperative >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Voltage at all times is provided through circuit 10 (LG/RD) to the multifunction switch for the hazard lamp function. When the hazard flasher lamp switch is engaged, the existing circuitry for the turn lamps/stoplamp is utilized to flash all the turn lamps/stoplamp on and off.

This pinpoint test is intended to diagnose the following:

scientia non olet · About LEMON Manuals