Normal Operation
WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
When the transmission is placed in REVERSE (R), voltage is routed to the reversing lamps through circuit 140 (BK/PK). The reversing lamps are provided ground through circuit 57 (BK).
This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Bulb holder (non-cutaway vehicles)
- Rear lamp assembly (cutaway vehicles)