LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1103 (Exterior Lighting System) >> Diagnostic Tests >> Headlamps >> Pinpoint Tests >> Pinpoint Test F: The Flash-To-Pass Feature Is Inoperative >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

The multifunction switch receives voltage at all times from circuit 195 (TN/WH). When the flash-to-pass feature is activated, the multifunction switch routes voltage to the high beam headlamps through circuit 632 (GY/OG).

This pinpoint test is intended to diagnose the following:

scientia non olet · About LEMON Manuals