LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1103 (Exterior Lighting System) >> Diagnostic Tests >> Headlamps >> Pinpoint Tests >> Pinpoint Test C: Both High Beams Are Inoperative >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

When the headlamp switch is placed in the HEADLAMPS ON position and the multifunction switch in the HIGH BEAM position, the multifunction switch routes voltage to the central junction box (CJB) fuse 30 (15A) through circuit 632 (GY/OG). Voltage is then routed to the high beams through circuit 12 (LG/BK).

This pinpoint test is intended to diagnose the following:

scientia non olet · About LEMON Manuals