LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1098 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Interior Door Handle - Side and Rear, Single Latch >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. If equipped, remove the door trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION article.
  2. Remove the 2 nuts, the interior door handle, and bezel.
  3. To install, reverse the removal procedure.