LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1098 (Handles, Locks, Latches And Entry Systems) >> Diagnostic Tests >> Locks, Latches and Entry Systems - Non Module Controlled >> Pinpoint Tests >> Pinpoint Test M: All Door Locks Are Inoperative From One Switch >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

The door lock control switches receive voltage from the central junction box (CJB) fuse 5 (30A) on circuit 517 (BK/WH).

This pinpoint test is intended to diagnose the following: