LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1098 (Handles, Locks, Latches And Entry Systems) >> Diagnostic Tests >> Locks, Latches and Entry Systems - Non Module Controlled >> Pinpoint Tests >> Pinpoint Test L: All Door Locks Are Inoperative >> Normal Operation - Cutaway

Normal Operation - Cutaway

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

The door lock control switches receive voltage from the central junction box (CJB) fuse 5 (30A) on circuit 517 (BK/WH).

When LOCK is pressed on the driver door lock control switch, voltage is supplied to the door lock actuators through circuits 124 (BN) and 117 (PK/BK). Ground is supplied for the door lock actuators through circuits 118 (PK/OG) and 123 (RD), the driver door lock control switch, circuits 1296 (OG/BK) and 123 (RD), the front passenger door lock control switch and circuit 57 (BK). When UNLOCK is pressed on the driver door lock control switch, voltage is supplied to the door lock actuators through circuits 123 (RD) and 118 (PK/OG). Ground is supplied for the door lock actuators through circuits 117 (PK/BK) and 124 (BN), the driver door lock control switch, circuits 1297 (YE/RD) and 124 (BN), the front passenger door lock control switch and circuit 57 (BK).

When LOCK is pressed on the front passenger door lock control switch, voltage is supplied to the door lock actuators through circuits 124 (BN) and 1297 (YE/RD), the driver door lock control switch and circuits 124 (BN) and 117 (PK/BK). Ground is supplied for the door lock actuators through circuits 118 (PK/OG) and 123 (RD), the driver door lock control switch, circuits 1296 (OG/BK) and 123 (RD), the front passenger door lock control switch and circuit 57 (BK). When UNLOCK is pressed on the front passenger door lock control switch, voltage is supplied to the door lock actuators through circuits 123 (RD) and 1296 (OG/BK), the driver door lock control switch and circuits 123 (RD) and 118 (PK/OG). Ground is supplied for the door lock actuators through circuits 117 (PK/BK) and 124 (BN), the driver door lock control switch, circuits 1297 (YE/RD) and 124 (BN), the front passenger door lock control switch and circuit 57 (BK).

scientia non olet · About LEMON Manuals