LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1026 (Information Center) >> Diagnostic Tests >> Instrument Cluster (IC), Message Center and Warning Chimes >> Pinpoint Tests >> Pinpoint Test AJ: DTC U0101 - Lost Communication With TCM >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

The instrument cluster (IC) sets DTC U0101 if data messages received from the transmission control module (TCM) over the high speed controller area network (HS-CAN) are missing. For a complete list of all network messages, refer to MODULE COMMUNICATIONS NETWORK article.

This pinpoint test is intended to diagnose the following: