LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1012 (Exterior Lighting System) >> Diagnostic Tests >> Turn Signal and Hazard Lamps >> Pinpoint Tests >> Pinpoint Test K: The Turn Signal Lamps Are Inoperative >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

The smart junction box (SJB) sends reference signals to the multifunction switch through circuit CLS20 (BN/BU) (LH turn input) and circuit CLS24 (BN/WH) (RH turn input). When the multifunction switch is switched to the LH or RH TURN positions, the voltage signal is routed to ground. When the SJB detects the multifunction switch in the LH or RH TURN position, the SJB sends voltage to the appropriate turn lamps.

This pinpoint test is intended to diagnose the following:

scientia non olet · About LEMON Manuals