Normal Operation - Trailer Tow Turn/Stoplamp
WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
The trailer tow LH stop/turn relay coil receives voltage through circuit CLS18 (GY/BN) when the vehicle LH rear stoplamp is illuminated. When the trailer tow LH stop/turn relay is energized, voltage is routed to the trailer tow connector through circuit CAT06 (YE).
The trailer tow RH stop/turn relay coil receives voltage through circuit CLS19 (VT/OG) when the vehicle RH rear stoplamp is illuminated. When the trailer tow RH stop/turn relay is energized, voltage is routed to the trailer tow connector through circuit CAT09 (GN).