LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1012 (Exterior Lighting System) >> Diagnostic Tests >> Reversing Lamps >> Pinpoint Tests >> Pinpoint Test V: The Individual Reversing Lamp Is Inoperative >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

When the reversing lamps relay is energized, voltage is routed to the reversing lamps through circuit CBB07 (GN/BU). The reversing lamps are provided ground through circuit GD182 (BK/GY).

This pinpoint test is intended to diagnose the following:

scientia non olet · About LEMON Manuals