LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Information Center - Instrumentation, Message Center And Warning Chimes >> Removal And Installation >> Message Center Switch >> Removal and Installation

Removal and Installation

  1. Remove the LH instrument panel trim.
  2. Press the upper headlamp bezel retaining clips from the back of the bezel and push the headlamp switch out of the instrument panel.
    • Disconnect the electrical connectors.
      NOTE: Once the top of the headlamp switch bezel is released from the instrument panel, rotate the headlamp switch bezel and switches out from the top of the bezel to release lower retaining tabs.
  3. Press the retaining tabs and remove the message center switch.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals