LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Sable Premier, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1255 (Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> DTC P0107: - Manifold Absolute Pressure (Map)/Barometric Pressure (BARO) Sensor Low

DTC P0107: - Manifold Absolute Pressure (Map)/Barometric Pressure (BARO) Sensor Low

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2009 Mercury Mountaineer, 2009 Mercury Milan, 2009 Mercury Mariner, 2009 Mercury Grand Marquis, and 2009 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
DTC P0107: - MANIFOLD ABSOLUTE PRESSURE (MAP)/BAROMETRIC PRESSURE (BARO) SENSOR LOW

Description:  MAP sensor operating voltage is below the minimum calibrated parameter of 0.024 volts.
Possible Causes: 
  • Open in the circuit, or short to ground
  • VREF circuit open, or short to ground
  • Damaged MAP sensor
Diagnostic Aids:  The VREF voltage should be between 4.0 and 6.0 volts.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to Pinpoint Test DM .