DTC P0098: - Intake Air Temperature Sensor 2 Circuit High
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2009 Mercury Mountaineer, 2009 Mercury Milan, 2009 Mercury Mariner, 2009 Mercury Grand Marquis, and 2009 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
DTC P0098: - INTAKE AIR TEMPERATURE SENSOR 2 CIRCUIT HIGH
| Description: | Indicates the sensor signal is greater than the self-test maximum. The intake air temperature 2 (IAT2) sensor maximum is 4.6 volts. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Monitor the IAT2 PID value. A typical IAT2 temperature should be greater than the IAT1 temperature. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DU . | ||