Wheel Hubs and Bearings
WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
The rear hub is supported or floats on the axle spindle on two opposing tapered roller bearings. A rear hub seal is installed behind the inner rear wheel bearing to prevent rear axle lubricant from leaking onto the rotor. The rear hub is retained on the spindle by a ratcheting hub nut tabbed to a slot on the spindle.
The rear wheel bearings are packed with a lithium-base grease, Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B, to provide initial lubrication until axle lubricant flows into the rear hubs and the inner rear wheel bearings during vehicle operation.