Differential Seals - RH: Removal
WARNING: This page is about a different variant/trim than selected.
- With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
- Turn the ignition to the OFF position.
- Remove the retainers and remove the LH splash shield.
- Remove the drain plug and drain the transmission fluid.
- Remove the RH halfshaft. For additional information, refer to FRONT DRIVE HALFSHAFTS .
- Using the Slide Hammer and RH Halfshaft Fluid Seal Remover, remove and discard the RH differential seal.