DTC U0402: Invalid Data Received From TCM
WARNING: This page is about a different variant/trim than selected.
U0402: INVALID DATA RECEIVED FROM TCM
| Description: | The traction battery control module (TBCM) continuously monitors the controller area network (CAN) for messages from the transaxle control module (TCM). This DTC is set when the message received from the TCM is out of expected range or contains invalid data. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Network DTC concerns occur during module-to-module communication. Refer to MODULE COMMUNICATIONS NETWORK , Communication Network DTC Chart to continue diagnosis. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. | ||