DTC U0155: Lost Communication With Instrument Panel Cluster (IPC) Control Module
WARNING: This page is about a different variant/trim than selected.
U0155 - LOST COMMUNICATION WITH INSTRUMENT PANEL CLUSTER (IPC) CONTROL MODULE
| Description: | The powertrain control module (PCM) continuously monitors controller area network (CAN) for messages from the instrument cluster. This DTC sets when the PCM does not receive the instrument cluster message within the defined amount of time. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Network DTC concerns occur during module-to-module communication. Refer to MODULE COMMUNICATIONS NETWORK , Communication Network DTC Chart to continue diagnosis. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. | ||