DTC U0151: Lost Communication With Restraints Control Module
WARNING: This page is about a different variant/trim than selected.
DTC
| Description: | The powertrain control module (PCM) continuously monitors the controller area network (CAN) for messages from the restraints control module (RCM). This DTC sets when the PCM does not receive the RCM message within the defined amount of time. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Network DTC concerns occur during module-to-module communication. Refer to MODULE COMMUNICATIONS NETWORK , Communication Network DTC Chart to continue diagnosis. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. | ||