DTC P2128: Throttle/Pedal Position Sensor/Switch E Circuit High
WARNING: This page is about a different variant/trim than selected.
P2128 - THROTTLE/PEDAL POSITION SENSOR/SWITCH E CIRCUIT HIGH
| Description: | The accelerator pedal position (APP) sensor 2 is out of self-test range high. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | An APP2 sensor PID reading may indicate a concern. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DK . | ||