DTC P2101: Throttle Actuator Control (TAC) Motor Range/Performance
WARNING: This page is about a different variant/trim than selected.
P2101 - THROTTLE ACTUATOR CONTROL (TAC) MOTOR RANGE/PERFORMANCE
| Description: | A powertrain control module (PCM) fault flag is set indicating the motor circuit is open, and may require cycling the key. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | A TAC motor circuit PID reading may indicate a concern, if available. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DV . | ||