LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Controls - Powertrain DTC Charts & Descriptions - (Hybrid)) >> Diagnostic Trouble Code (DTC) Charts and Descriptions >> DTC P1A13: Hybrid Powertrain Control Module - Regenerative Braking Disabled

DTC P1A13: Hybrid Powertrain Control Module - Regenerative Braking Disabled

WARNING: This page is about a different variant/trim than selected.
P1A13 - HYBRID POWERTRAIN CONTROL MODULE - REGENERATIVE BRAKING DISABLED

Description:  This is an informational DTC and is set as a result of the torque monitor disabling the regenerative braking. This does not shutdown the vehicle but causes the fuel economy of the vehicle to decrease due to loss of regenerative braking.
Possible Causes: 
  • Excess powertrain deceleration torque or unintended vehicle motion
  • Accelerator pedal position (APP) sensor or harness
  • Brake pedal position (BPP) sensor or harness
Diagnostic Aids:  Diagnose all DTCs related to the items in possible causes.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All Refer to the Description, Possible Causes and Diagnostic Aids for the DTC.