DTC P0A09: Dc/Dc Converter Status Circuit Low
WARNING: This page is about a different variant/trim than selected.
P0A09 - DC/DC CONVERTER STATUS CIRCUIT LOW
| Description: | This DTC indicates the DC/DC fault (DCF) circuit is shorted to ground, there is internal DC/DC damage, or the 12 volt bus voltage dropped below the calibrated threshold. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Make sure the key is not left in ON position, or the engine in not left running with a transaxle in the NEUTRAL gear for an extended period of time. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST HH . | ||