DTC P0505: Idle Air Control (IAC) System

WARNING: This page is about a different variant/trim than selected.

P0505 - IDLE AIR CONTROL (IAC) SYSTEM

Description:	The powertrain control module (PCM) attempts to control engine speed during the key on, engine running (KOER) self-test. The test fails when the desired RPM could not be reached or controlled during the self-test.
Possible Causes:	Failure mode effects management (FMEM) condition is present Intake air restriction Exhaust restriction Sludged throttle body Vacuum leaks Damaged electronic throttle body (ETB) Damaged PCM
Diagnostic Aids:	This DTC may be accompanied by other DTCs. Diagnose other DTCs first. If other DTCs are not present inspect the intake air system for air restrictions, vacuum leaks, and damage. If no concerns are present, clear the DTC and carry out the KOER self-test.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to PINPOINT TEST A .