DTC P0301: Cylinder 1 Misfire Detected
WARNING: This page is about a different variant/trim than selected.
P0301 - CYLINDER 1 MISFIRE DETECTED
| Description: | The misfire detection monitor is designed to monitor engine misfire and identify the specific cylinder in which the misfire has occurred. Misfire is defined as lack of combustion in a cylinder due to absence of spark, poor fuel metering, poor compression, or any other cause. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The malfunction indicator lamp (MIL) blinks once per second when a misfire severe enough to cause catalyst damage is detected. If the MIL is on steady state due to a misfire, this indicates the threshold for emissions was exceeded and caused the vehicle to fail an inspection and maintenance tailpipe test. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | - | GO to PINPOINT TEST HD . | GO to PINPOINT TEST HD . |