DTC P0219: Engine OVERSPEED Condition
WARNING: This page is about a different variant/trim than selected.
P0219 - ENGINE OVERSPEED CONDITION
| Description: | Indicates the vehicle has been operated in a manner which caused the engine speed to exceed a calibrated limit. The engine RPM is continuously monitored and evaluated by the powertrain control module (PCM). The DTC sets when the RPM exceeds the calibrated limit set within the PCM. For additional information on the engine RPM limiter, refer to POWERTRAIN CONTROL SOFTWARE . | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | If the vehicle has been operated in a manner which caused the engine speed to exceed the calibrated limit and there are no other symptoms, RETURN the vehicle to customer with information about the DTC. If there are other symptoms, Refer to NO DIAGNOSTIC TROUBLE CODES (DTCS) PRESENT SYMPTOM CHART INDEX , to continue diagnosis. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. | ||