DTC P0112: Intake Air Temperature (IAT) Sensor 1 Circuit Low Input
WARNING: This page is about a different variant/trim than selected.
P0112 - INTAKE AIR TEMPERATURE (IAT) SENSOR 1 CIRCUIT LOW INPUT
| Description: | Indicates the sensor signal is less than the self-test minimum. The IAT sensor minimum is 0.2 volt. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | An IAT V PID reading less than 0.2 volt with KOEO or during any engine operating mode indicates a concern. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DA . | ||