Fuel Pump Monitor (FPM) - Dual Speed MRFS
WARNING: This page is about a different variant/trim than selected.
The fuel pump control module communicates diagnostic information to the PCM through the FPM circuit. This information is sent by the fuel pump control module as a duty cycle signal. The four duty cycle signals that may be sent are listed in the following table.
FUEL PUMP DRIVER MODULE DUTY CYCLE SIGNALS
| Duty Cycle | Comments |
|---|---|
| 20% | This duty cycle indicates the fuel pump control module is receiving an invalid duty cycle from the PCM. |
| 40% | This duty cycle indicates the fuel pump control module is receiving an invalid duty cycle from the RCM. |
| 60% | This duty cycle indicates the fuel pump control module is functioning normally. |
| 80% | This duty cycle indicates the fuel pump control module is detecting a concern with the secondary circuits. |