LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Controls - Description & Operation - (Hybrid)) >> Engine Control Components >> DC/DC Fault

DC/DC Fault

WARNING: This page is about a different variant/trim than selected.

The DC/DC fault (DCF) signal is an input to the PCM from the DC/DC converter. This signal is low under normal conditions and switches high when a concern exists within the DC/DC converter cooling system, the high voltage power supply to the DC/DC converter, or the low voltage output system. The PCM disables or limits the operation of the DC/DC converter by the DC/DC enable circuit (DCE), when a DCF concern is indicated. For additional information on DCF, refer to the DC/DC converter description in HYBRID ELECTRIC CONTROL HARDWARE .

scientia non olet · About LEMON Manuals