LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Controls - Description & Operation - (Hybrid)) >> Engine Control Components >> DC/DC Enable (DCE)

DC/DC Enable (DCE)

WARNING: This page is about a different variant/trim than selected.

The DCE is an output from the PCM to the DC/DC converter. The PCM enables the DC/DC converter after the PCM receives a contractors closed message and no error messages. The DCE circuit is high (the low side driver is off) when the DC/DC is commanded on. When the DCE low side driver is activated, the DC/DC converter is commanded off. For additional information on DCE, refer to the DC/DC converter description in HYBRID ELECTRIC CONTROL HARDWARE .

scientia non olet · About LEMON Manuals