LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 26 (Anti-Theft System - Passive Anti-Theft System (Pats) - (Hybrid)) >> Diagnosis And Testing >> Anti-Theft >> Pinpoint Tests >> Pinpoint Test A: DTC B2103 >> Pinpoint Test A: DTC B2103

Pinpoint Test A: DTC B2103

WARNING: This page is about a different variant/trim than selected.
  1. A1 INSPECT THE PATS TRANSCEIVER FOR CORRECT INSTALLATION 
    NOTE: Replacement of the PATS transceiver does not require the PATS keys to be programmed into the Instrument Cluster (IC) again.
    • Ignition OFF.
    • Verify the PATS transceiver is correctly installed. Refer to PASSIVE ANTI-THEFT SYSTEM (PATS) TRANSCEIVER .
    • Connect the scan tool.
    • Ignition ON.
    • Clear the DTCs
    • Ignition OFF.
    • Ignition ON.
    • Retrieve the DTCs
    • Is DTC B2103 retrieved? 
scientia non olet · About LEMON Manuals