Motor Electronics Cooler

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Motor Electronics Cooler Components With Torque Specifications

Courtesy of FORD MOTOR CO.

PART NUMBER DESCRIPTION

Item	Part Number	Description
1	8B273	Motor Electronics Cooling System (MECS) radiator inlet hose
2	8B274-B	MECS radiator outlet hose
3	N606676-S	MECS radiator bolts
4	8005-B	MECS radiator

Drain the Motor Electronics Cooling System (MECS). For additional information, refer to MOTOR ELECTRONICS COOLING SYSTEM DRAINING AND FILLING .
Remove the front bumper cover. For additional information, refer to BUMPERS .
Loosen the hose clamp and disconnect the MECS radiator inlet hose.

Fig 2: Locating Hose Clamp
Courtesy of FORD MOTOR CO.
Loosen the hose clamp and disconnect the MECS radiator outlet hose.

Fig 3: Locating MECS Radiator Outlet Hose
Courtesy of FORD MOTOR CO.
NOTE: RH shown, LH similar.

Remove the MECS radiator bolts.
- To install, tighten to 6 Nm (53 lb-in).
Fig 4: Locating MECS Radiator Bolts
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.