LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Engine Mechanical - 2.5L - (Hybrid)) >> Disassembly And Assembly >> Piston >> Disassembly

Disassembly And Assembly: Piston: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove the piston rings from the piston.
    • Discard the piston rings.
  2. Remove the 2 piston pin retainers and the piston pin.
    3. NOTE: If the piston and connecting rod are to be reinstalled, they must be assembled in the same orientation. Mark the piston orientation to the connecting rod for reassembly.
  3. Separate the piston from the connecting rod.
  4. Clean and inspect the piston and connecting rod. For additional information, refer to ENGINE SYSTEM-GENERAL INFORMATION .
scientia non olet · About LEMON Manuals