LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Engine Mechanical - 3.0L (4V)) >> Disassembly And Assembly >> Cylinder Head >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different variant/trim than selected.
SPECIAL TOOL REFERENCE

G06062534Courtesy of FORD MOTOR CO.
Compressor, Valve Spring
303-300 (T87C-6565-A)
G06062291Courtesy of FORD MOTOR CO.
Compressor, Valve Spring
303-350 (T89P-6565-A)
G06094971Courtesy of FORD MOTOR CO.
Compressor, Valve Spring
303-1418
G06062537Courtesy of FORD MOTOR CO.
Installer, Valve Stem Oil Seal
303-470 (T94P-6510-CH)

Cylinder Head 

Fig 1: Identifying Cylinder Head And Valve Spring Retainer Key
G06095805Courtesy of FORD MOTOR CO.
PART NUMBER DESCRIPTION

Item Part Number Description
1 6518 Valve spring retainer key (24 required)
2 6514 Valve spring retainer (12 required)
3 6513 Valve spring (12 required)
4 6A517 Valve stem seal (12 required)
5 6505 Intake valve (6 required)
6 6507 Exhaust valve (6 required)