AUTO - ECON Mode OFF

WARNING: This page is about a different variant/trim than selected.

The A/C button will be automatically selected and the indicator will be illuminated. The A/C button may be deselected to disable A/C operation.
The HVAC module will transmit an A/C request and engine run request to the PCM via the IC if the HVAC module has determined that A/C operation is required to achieve the selected temperature.
If the ambient temperature is below approximately 10°C (50°F), or if the HVAC module determines that A/C operation is not required to achieve the selected temperature, an A/C request and engine run request will not be sent; although, the A/C indicator will remain illuminated. The engine will cycle only per normal hybrid operation and the A/C compressor will not cycle.
If the ambient temperature is above approximately 10°C (50°F), and A/C operation is required to achieve the set temperature, the engine will run continuously, and will not shut off when the A/C compressor cycles off. The A/C compressor will cycle per normal A/C compressor operation.