LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Automatic Transmission Cooler - Transaxle/Transmission Cooling) >> Removal And Installation >> Transmission Fluid Cooler >> Installation

Transmission Fluid Cooler: Installation

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the transmission fluid cooler in the retaining pockets.
  2. Install the transmission fluid cooler screws.
    • Tighten to 10 Nm (89 lb-in).
  3. Connect the transmission fluid cooler hoses to the cooler.
  4. Install new transmission cooler-to-hose clamps.
  5. Fill the transmission with clean automatic transmission fluid and verify correct operation.
  6. Install the lower air deflector.
scientia non olet · About LEMON Manuals