LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Clutch System) >> Removal And Installation >> Pilot Bearing >> Removal

Pilot Bearing: Removal

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the clutch disc and the clutch pressure plate. For additional information, refer to Clutch Disc and Pressure Plate - 4.0L , Clutch Disc and Pressure Plate - 4.6L  or Clutch Disc and Pressure Plate - 5.4L .
  2. Using the Pilot Bearing Remover, remove the pilot bearing.
  3. Fig 1: Identifying Special Tool 308-001
    GF0015728Courtesy of FORD MOTOR CO.