LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Engine Mechanical - 4.0L SOHC) >> In-Vehicle Servicing >> Valve Cover - RH >> Removal

Valve Cover - RH: Removal

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces that enters the oil passages, coolant passages or the oil pan, can cause engine failure.
  1. Remove the PCV tube.
  2. Disconnect the PCV valve electrical connector.
  3. Detach the heater hose retainer from the valve cover.
  4. Remove the wiring harness bracket bolt from the back of the RH cylinder head and detach the bracket from the valve cover stud bolt.
  5. Detach the engine wiring and spark plug wiring retainers from the 2 valve cover stud bolts.
  6. Remove the 2 bolts, the 4 stud bolts and the RH valve cover.
scientia non olet · About LEMON Manuals