LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Engine Mechanical - 4.0L SOHC) >> In-Vehicle Servicing >> Oil Pump >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cylinder block cradle. For additional information, refer to Cylinder Block Cradle .
  2. Remove the 2 bolts and the oil pump.
    • To install, tighten to 19 Nm (168 lb-in).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals