LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Engine Mechanical - 4.0L SOHC) >> In-Vehicle Servicing >> Oil Pump Screen and Pickup Tube >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil pan. For additional information, refer to Oil Pan .
  2. Remove the bolt and the oil pump screen and pickup tube.
    • To install, tighten to 11 Nm (97 lb-in).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals