LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Engine Mechanical - 4.0L SOHC) >> In-Vehicle Servicing >> Hydraulic Lash Adjuster >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the camshaft roller followers. For additional information, refer to Camshaft Roller Follower .
    2. NOTE: Mark the position of the hydraulic lash adjusters so they can be installed in their original positions.
  2. Remove the hydraulic lash adjusters.
    3. NOTE: The hydraulic lash adjusters must be installed in their original positions.
    NOTE: Lubricate the hydraulic lash adjusters with clean engine oil.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals