LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Engine Mechanical - 4.0L SOHC) >> In-Vehicle Servicing >> Crankshaft Front Seal >> Removal

Crankshaft Front Seal: Removal

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the crankshaft pulley. For additional information, refer to Crankshaft Pulley .
  2. Using the Crankshaft Front Oil Seal Remover, remove and discard the crankshaft front seal.
    3. Fig 1: Identifying Crankshaft Front Oil Seal & Special Tool (303-107)
    GF0009316Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals