LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Automatic Transmission) >> In-Vehicle Servicing >> Transmission Support Crossmember >> Removal

Transmission Support Crossmember: Removal

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING .
  2. Remove the catalytic converter. For additional information, refer to EXHAUST SYSTEM .
  3. Support the transmission with a transmission jack.
  4. Remove the transmission crossmember-to-floor pan screws.
    5. Fig 1: Locating Transmission Crossmember-To-Floor Pan Screws
    G03982786Courtesy of FORD MOTOR CO.
  5. Remove the transmission insulator-to-extension housing center screw.
    6. Fig 2: Locating Transmission Mount Center Screw
    GF0015487Courtesy of FORD MOTOR CO.
  6. Remove the transmission crossmember.
scientia non olet · About LEMON Manuals