Normal Operation
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
When activated, the windshield wiper/washer switch sends a ground signal through circuit 680 (LB/OG) to the windshield wiper motor. The windshield wiper motor then supplies voltage through circuit 941 (BK/WH) to activate the windshield washer pump motor. Ground is provided to the windshield washer pump through circuit 1205 (BK).
This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Windshield wiper motor
- Windshield washer pump