LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Interior Trim & Ornamentation) >> Removal And Installation >> Sunshade >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the headliner. For additional information, refer to Headliner .
  2. Remove the 8 sunshade screws.
    • To install, tighten to 2 Nm (18 lb-in).
  3. To install, reverse the removal procedure.