LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Interior Trim & Ornamentation) >> Removal And Installation >> Door Trim Panel >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the sail panel.
    • If equipped, disconnect the exterior mirror control switch electrical connector.
  2. Remove the interior door handle cover and the door trim panel bolt.
  3. Remove the window control switch housing.
    • Disconnect the electrical connector.
  4. Remove the door trim panel center screw.
  5. Remove the door trim panel handle cover and the door trim panel bolt.
  6. Remove the 8 outer door trim panel screws and the door trim panel.
    • Disconnect the interior door handle actuating cable.
    • If equipped, disconnect the subwoofer electrical connector.
  7. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals