LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Handles, Locks, Latches & Entry Systems) >> Description And Operation >> Handles, Locks, Latches and Entry Systems >> Deactivating/Activating The Power Door Trim Switch Inhibit Feature

Deactivating/Activating The Power Door Trim Switch Inhibit Feature

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Both of the doors must be closed during the inhibit programming procedure.
  1. Turn the key to RUN.
  2. Press the door lock control switch UNLOCK button 3 times.
  3. Turn the key to OFF.
  4. Press the door lock control switch UNLOCK button 3 times.
  5. Turn the key to RUN.
  6. Press the door lock control switch LOCK button 2 times. The horn chirps once if the inhibit feature was just deactivated or it chirps twice (1 short chirp and 1 long chirp) if the unlock inhibit feature was just activated.
  7. Turn the key to OFF. The horn chirps to confirm the procedure is complete.
scientia non olet · About LEMON Manuals