LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (HVAC Climate Control System) >> Removal And Installation >> Temperature Blend Door Actuator >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lower the glove compartment.
  2. Disconnect the temperature blend door actuator electrical connector.
  3. Remove the 2 temperature blend door actuator screws.
  4. Remove the temperature blend door actuator.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals