LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (HVAC Climate Control System) >> Removal And Installation >> Clutch and Clutch Field Coil >> Removal

Clutch and Clutch Field Coil: Removal

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the A/C compressor. For additional information, refer to Air Conditioning (A/C) Compressor - 4.0L  or Air Conditioning (A/C) Compressor - 4.6L, 5.4L .
  2. Remove the A/C clutch disc and hub bolt.
    1. Using the special tool, hold the A/C clutch disc and hub.
    2. Remove the A/C clutch disc and hub bolt.
    3. Fig 1: A/C Clutch Disc & Hub Bolt
    GF0004394Courtesy of FORD MOTOR CO.
  3. Remove the A/C clutch disc and hub.
  4. Remove the A/C clutch disc and hub spacer(s).
  5. Remove the A/C compressor pulley snap ring.
    6. CAUTION: Do not use air tools. Damage to the A/C compressor pulley or A/C compressor may result.
  6. Remove the A/C compressor pulley.
    1. Install the special tool.
    2. Remove the A/C compressor pulley.
    7. Fig 2: A/C Compressor Pulley
    GF0004395Courtesy of FORD MOTOR CO.
    CAUTION: Do not use air tools. Damage to the A/C clutch field coil or A/C compressor may result.
  7. Remove the A/C clutch field coil.
    1. Install the special tool.
    2. Install the special tool.
    3. Remove the A/C clutch field coil.
    8. Fig 3: Removing A/C Clutch Field Coil Using Special Tools (412-001, 412-067)
    GF0008052Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals