LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Electronic Engine Control) >> Removal And Installation >> Intake Air Temperature 2 (IAT2) Sensor - 5.4L (4V) >> Removal

Intake Air Temperature 2 (IAT2) Sensor - 5.4L (4V): Removal

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the intake air temperature 2 (IAT2) sensor electrical connector.
  2. Remove the IAT2 sensor.